亚洲一区欧美在线,日韩欧美视频免费观看,色戒的三场床戏分别是在几段,欧美日韩国产在线人成

漸開線霧化螺旋噴嘴的噴射型面幾何模型
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    提出了一種具有漸開線霧化面的新型螺旋噴嘴。采用內外雙圓錐的空心螺旋噴射型面,使設計的噴嘴體應力分布更均勻,克服了傳統螺旋噴嘴的霧化面具有部分重疊過渡面的缺點。根據霧化平面的要求,對漸開線的首尾進行了優化處理。對螺旋角進行漸變設計,采用動坐標系向定坐標系映射的方法推導了噴射型面的空間幾何模型,使用Matlab對設計的型面進行了仿真。結果驗證了所提出幾何模型的有效性,為螺旋噴嘴的設計和制造提供了理論依據。

    Abstract:

    A novel spiral nozzle with involute atomization surface was presented. The spray surface was design as inside and outside conic gradual change helix angle helicoids, which made the stress of the nozzle more uniform. Also it overcame the shortcomings of atomization overlap for traditional spiral nozzle. According to the requirements of involute atomization instead of homocentric circles atomization, the beginning and the end of the involute has been optimized. Then the dynamic and static coordinates were employed to deduce the space geometry model of spray helicoids. At last the model was simulated by using Matlab. The results validated the effectiveness of the proposed geometry model, which provided the theoretic basis for designing and manufacturing the spiral nozzles.

    參考文獻
    相似文獻
    引證文獻
引用本文

李川,王時龍,鐘增勝,張賢明,康玲.漸開線霧化螺旋噴嘴的噴射型面幾何模型[J].農業機械學報,2007,38(6):75-78.[J]. Transactions of the Chinese Society for Agricultural Machinery,2007,38(6):75-78.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期:
文章二維碼