亚洲一区欧美在线,日韩欧美视频免费观看,色戒的三场床戏分别是在几段,欧美日韩国产在线人成

基于Fluent的液力變矩器內流場數值計算
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    為了找出影響液力變矩器傳動效率的原因,為進一步改善變矩器的性能和設計制造水平提供理論依據,通過Fluent對變矩器內流場進行數值模擬。采用分離求解器,絕對速度方程,標準k-ε模型,標準壁面函數,二階迎風離散格式,SIMPLE算法,壓力進口和壓力出口,并使用混合平面模型。通過數值計算,得到了不同工況下內流場的分布情況,并計算出變矩器的原始特性,最后將計算結果與實驗結果對比,最大誤差不超過5%,證明了三維計算的正確性。

    Abstract:

    In order to find out the cause of influence on efficiency of the torque converter and provide theoretical direction to improve performance and design and manufacture level of the converter, by using Fluent, the three-dimensional internal flow field of the converter was numerically simulated by using segregated solver, absolute velocity formulation, standard k-ε model, standard wall functions, second order upwind discretization, SIMPLE pressure-velocity coupling, pressure inlet and outlet, and mixing-plane model. By numerical calculation, the whole flow distribution in the different work conditions was attained and the performance characteristics curves of the converter were also gained. Finally calculated results were compared with the experimental results and maximum error was less than 5% percent, which proved that three-dimensional calculation was correct

    參考文獻
    相似文獻
    引證文獻
引用本文

許濤,過學迅,張杰山,桂鵬程.基于Fluent的液力變矩器內流場數值計算[J].農業機械學報,2007,38(12):152-155.[J]. Transactions of the Chinese Society for Agricultural Machinery,2007,38(12):152-155.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: