亚洲一区欧美在线,日韩欧美视频免费观看,色戒的三场床戏分别是在几段,欧美日韩国产在线人成

淬火態45號鋼在等通道角擠壓過程中晶粒演化
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    將馬氏體相變與強塑性變形工藝相耦合,開發了基于等通道角擠壓快速制備亞微米級中碳鋼工藝。試驗采用45號鋼,就淬火態在不同回火溫度和回火時間條件下進行擠壓。試驗結果表明,由馬氏體相變得到的過飽和鐵素體為動態再結晶和應變誘導碳化物析出作了能量和組織準備,并在一定的回火溫度下進行等通道角擠壓使位錯密度快速增加,實現了動態再結晶,形成了細小晶粒,同時應變誘導碳化物從過飽和的鐵素體中以彌散形式析出,使亞微米鐵素體基體上均勻分布著細小碳化物。這種組織結構具有較高的穩定性,在550℃退火30 min后,晶粒尺寸仍保持在

    Abstract:

    1 μm以內。A technique coupled martensite transformation with severe plastic deformation (SPD) has been developed for rapid producing submicron grain medium carbon steel based on equal channel angular pressing (ECAP). Experiments were conduced on medium-carbon steel,and quenched steel was pressed at different tempering temperatures and time. The results indicted that the homogeneous supersaturated ferrites by martensite transformation was prepared for dynamic recrystallization and strain induced carbide precipitation, accumulated higher dislocation density in the crystal structure during ECAP at given tempering temperature urged to recrystallize and induced carbide particles to precipitate in dispersed phase. Homogeneous ultra-fined grain ferrites with fine carbide particles distributed grain boundaries could be achieved. These submicron microstructures possessed thermal stability and they remained grain size of less than 1 μm after annealing at 550℃ for 30 min. 

    參考文獻
    相似文獻
    引證文獻
引用本文

汪建敏,陸晉,姜銀方,周孔亢,許曉靜.淬火態45號鋼在等通道角擠壓過程中晶粒演化[J].農業機械學報,2007,38(12):185-189.[J]. Transactions of the Chinese Society for Agricultural Machinery,2007,38(12):185-189.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: