亚洲一区欧美在线,日韩欧美视频免费观看,色戒的三场床戏分别是在几段,欧美日韩国产在线人成

低比轉數沖壓焊接離心泵三維湍流數值模擬
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    對一低比轉數沖壓焊接離心泵在帶分流葉片以及不帶分流葉片情況下的葉輪及蝸殼耦合場進行了數值模擬。計算采用雷諾時均方程和RNG k—ε湍流模型,速度與壓力耦合采用SIMPLEC算法。計算了設計工況、小流量工況及大流量工況下離心泵內部流場分布。增加分流葉片后,離心泵葉輪流道內的回流和二次流現象得到了有效控制。對比分析性能預測與試驗結果的差異,在設計工況時離心泵性能預測的最大偏差為3%;非設計工況時性能預測的最大偏差為

    Abstract:

    10%。 By adopting time averaged N—S equations and RNG k—ε model,the impeller-volute coupling characteristics were simulated by using SIMPLEC algorithm. The 3—D turbulent flow in centrifugal pump impellers with and without splitter blades were simulated under the different flow rates. When adding splitter blades,the results show that it can effectively control the reflux and flow separation at the impeller outlet. In comparison with performance prediction and experiment,the maximal error between performance prediction and experiment result is no more than 3% under the design flow rate,while 10% under the off-design flow rates.  

    參考文獻
    相似文獻
    引證文獻
引用本文

黎義斌,鄔國秀.低比轉數沖壓焊接離心泵三維湍流數值模擬[J].農業機械學報,2008,39(7):72-75.[J]. Transactions of the Chinese Society for Agricultural Machinery,2008,39(7):72-75.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: