亚洲一区欧美在线,日韩欧美视频免费观看,色戒的三场床戏分别是在几段,欧美日韩国产在线人成

基于主軸電動機電流的微孔鉆削在線監測技術
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    以主軸電動機電流為監測對象研究微孔鉆削的在線監測。以50支直徑為0.5 mm的高速鋼麻花鉆為樣本,在數控高速精密微孔鉆床上,對鉆削H62黃銅時微鉆頭折斷的主軸電動機電流對應的電壓極限值進行了檢測,經過參數估計和假設檢驗,得出了主軸電動機電流對應的電壓極限值服從三參數威布爾分布的結論,并建立了基于可靠性的主軸電動機電流對應的電壓監測閾值的確定方法。選取不同可靠度水平進行了在線監測實驗,并與普通鉆削比較。當選取可靠度水平為0.99時,在鉆頭利用率相同的情況下,鉆頭的折斷率由

    Abstract:

    40%下降到0。This paper studied the on-line monitor of micro-hole drilling based on electrical current of the principal axis electromotor. Taking 50 high speed steel twist drills with the diameter of 0.5 mm as the samples, the high-point voltage value corresponding to electrical current of the principal axis electromotor was monitored when the micro-drill was broken during drilling H62 brass. Through parameters estimating and tentative proving, the results that the high-point voltage value obeys three parameters Weibull distribution were gained, and the access method of the monitored voltage thresholds corresponding to electrical current of the principal axis electromotor was built up. Finally, the experiments of on-line monitoring were carried out with different reliable levels. The results showed that the drill breaking ratio of decreased from 40% to 0 when reliable level was selected to be 0.99 and the drill utilization ratio was the same.  

    參考文獻
    相似文獻
    引證文獻
引用本文

李雪,楊兆軍,賈慶祥,孫艷紅.基于主軸電動機電流的微孔鉆削在線監測技術[J].農業機械學報,2008,39(9):183-186.[J]. Transactions of the Chinese Society for Agricultural Machinery,2008,39(9):183-186.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期:
文章二維碼