亚洲一区欧美在线,日韩欧美视频免费观看,色戒的三场床戏分别是在几段,欧美日韩国产在线人成

基于ANSYS的標準泵蝸殼強度分析
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    為解決國產標準泵蝸殼壁較厚問題,用傳統公式計算S50-160/75型標準泵壁厚,并進行修正。采用Fluent模擬小流量與設計工況下蝸殼內沿液流方向的壓力分布,分別為由大到小再變大及逐漸增大的趨勢。采用ANSYS計算2種工況下蝸殼所受應力與應變情況,得到易破壞部位分別為蝸殼隔舌與環形部分最大尺寸軸面處。對蝸殼強度進行校核及有限元分析,表明修正后的蝸殼壁厚滿足強度要求。并通過水力性能試驗,得到計算結果與試驗數據相吻合。

    Abstract:

    The thickness of the S50-160/75 standard pump volute calculated by the traditional formula was amended to solve the volute wall of the domestic standard pump. The pressure distributions in the volute along the flowing were simulated by using Fluent software, and the trends were from rising to declining to rising again in low flux condition and rising gradually in rated condition. The stresses and strains have been calculated approximately in different conditions with ANSYS software, it concluded that the throat section and the largest ring of the axial region are the most easily damaged and the most dangerous parts. Strength check on the volute and finite element analysis showed that the amended thickness of the volute met the strength requirements. And the hydraulic performance tests of the pump proved that the calculated results are consistent with the actual results.

    參考文獻
    相似文獻
    引證文獻
引用本文

王洋,劉哲.基于ANSYS的標準泵蝸殼強度分析[J].農業機械學報,2008,39(10):85-89.[J]. Transactions of the Chinese Society for Agricultural Machinery,2008,39(10):85-89.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期:
文章二維碼