亚洲一区欧美在线,日韩欧美视频免费观看,色戒的三场床戏分别是在几段,欧美日韩国产在线人成

基于連續多點成形原理的旋壓成形技術
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Based on Principle of Continuous Multipoint Forming
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    介紹了傳統的旋壓工藝，提出了基于連續多點成形原理的旋壓成形工藝，對工作旋輪的布置和驅動方式進行了探討，研制出高效旋壓成形裝置，在所研制的旋壓成形裝置上成形了大量的實驗件，實現了圓形板料件的高效旋壓成形，為建立新型高效旋壓成形的基本理論，解決柔性旋輪結構設計與控制點設置、自動控制系統的控制模式及探索技術參數作必要的準備工作。

    Abstract:

    The novel spinning processing based on the continuous multipoint forming was proposed, and the rollers disposal and the drive mode were discussed. Then, the effective spinning set was developed, on which a lot of experimental parts were formed, and the round sheet metal was achieved. Therefore, this study paves the way for building the basic theory of effective spinning, resolving the structure design of flexible roller, the control point setup, and the mode of auto control system, as well probing into technology parameter.

    參考文獻
    相似文獻
    引證文獻
引用本文

胡志清,李明哲,隋振,關文煜.基于連續多點成形原理的旋壓成形技術[J].農業機械學報,2009,40(12):247-250. Based on Principle of Continuous Multipoint Forming[J]. Transactions of the Chinese Society for Agricultural Machinery,2009,40(12):247-250.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: