亚洲一区欧美在线,日韩欧美视频免费观看,色戒的三场床戏分别是在几段,欧美日韩国产在线人成

柴油機缸蓋水腔流動與沸騰傳熱的流固耦合數值模
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


-solid Coupling Numerical Simulation on Flow and Boiling Heat Transfer of Cooling Water-jacket in Cylinder Head of Diesel Engine
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    采用CFD軟件STAR-CD和FEA軟件ABAQUS對226B型柴油機缸蓋冷卻水腔內的流動和傳熱過程進行了流固耦合數值模擬計算。為反映沸騰傳熱的影響，基于FORTRAN語言開發了單相流沸騰傳熱模型，將其嵌入到STAR-CD中。與試驗結果的比較表明，加入沸騰傳熱模型可以大幅度提高模擬計算的精度，最大誤差由18%下降至7%，為柴油機冷卻水腔的優化設計提供了理論依據。

    Abstract:

    Fluid-solid coupling numerical simulation on the flow and heat transfer of cooling water-jacket in cylinder head for 226B diesel engine was performed using the commercial CFD software STARCD and the FEA software ABAQUS. In order to consider the influence of boiling heat transfer, a boiling heat transfer model was developed based on FORTRAN and built into STAR-CD. Comparison between simulation and experiment showed that the two results are in good agreement with each other. Comparing with the results of simulation without the boiling heat transfer model, maximum deviation drops from 18% to 7%. So the simulation provides a more dependable theoretical evidence for diesel water-jacket optimization.

    參考文獻
    相似文獻
    引證文獻
引用本文

傅松,胡玉平,李新才,陳志忠,李國祥,潘繼紅.柴油機缸蓋水腔流動與沸騰傳熱的流固耦合數值模[J].農業機械學報,2010,41(4):27-30.-solid Coupling Numerical Simulation on Flow and Boiling Heat Transfer of Cooling Water-jacket in Cylinder Head of Diesel Engine[J]. Transactions of the Chinese Society for Agricultural Machinery,2010,41(4):27-30.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期:
文章二維碼