亚洲一区欧美在线,日韩欧美视频免费观看,色戒的三场床戏分别是在几段,欧美日韩国产在线人成

三維曲面卷板柔性輥設計與成形工藝分
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


of Roll Bending Configuration and Technology of Roll Bending Three Dimensional Surface
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    通過分析基于連續多點調形方法的三維曲面卷板成形原理，對卷板成形裝置關鍵件柔性輥的不同布置和驅動方式進行了研究。確立了三輥布置雙端驅動的方式，設計了三維曲面卷板成形裝置。對卷板成形工藝進行分析，探討了不同的成形工藝過程。結果表明：一步成形，在小變形量的情況下適用，當上輥的下壓量超出一定值時，無法成形；分步成形法，以小的下壓量逐漸誘導板材變形，可以消除板材邊緣皺褶，減小回彈，有利于板材成形。

    Abstract:

    Continuous multipoint forming method(CMFM) was introduced simply. The key rollers of continuous multipoint forming device(CMFD) were studied in different disposals and different drives. The drive of three rollers at two sides was felicitous realized, and the CMFD was developed. The process of roll bending was discussed. The results showed that one-step forming is adopt on mini deformation, but when the press displacement of top roller exceeds stated value, the procedure can’t be continued, the multi-step forming is advantaged of inducing sheet metal deformed, eliminates the sides winkle, and reduces the spring back with each mini deformation.

    參考文獻
    相似文獻
    引證文獻
引用本文

胡志清,李明哲,劉家安.三維曲面卷板柔性輥設計與成形工藝分[J].農業機械學報,2010,41(4):213-216. of Roll Bending Configuration and Technology of Roll Bending Three Dimensional Surface[J]. Transactions of the Chinese Society for Agricultural Machinery,2010,41(4):213-216.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期:
文章二維碼