亚洲一区欧美在线,日韩欧美视频免费观看,色戒的三场床戏分别是在几段,欧美日韩国产在线人成

車身覆蓋件CAD模型曲面縫合技術
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


of CAD Geometric Model for Automobile Panels
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    修復車身覆蓋件CAD數據是有限元分析前處理中的重要步驟，針對車身覆蓋件CAD模型中曲面縫隙問題，采用NURBS技術對曲面縫合加以研究，通過管柱算法快速判定匹配邊界，以基于特征的曲線合并方法完成曲面縫合，并開發出曲面縫合算法模塊。通過對汽車翼子板零件的縫合驗證了算法的有效性。

    Abstract:

    Repairing of panel CAD geometric model is an important pre-processing step of the finite element analysis, and widely used in the computer-aided geometric design field. This paper focused on the surface healing method of panel CAD model, which was proposed and analyzed by NURBS technology. Firstly, matching-curves border was determined fast through the pipeline method, the surfaces were stitched by the matching-curves method with characteristics. On the basis of the algorithm, a surface stitching program module was developed. The validity of algorithm was verified by healing automobile front fender parts.

    參考文獻
    相似文獻
    引證文獻
引用本文

狄馳,田原嫄,鄭國君,郭威.車身覆蓋件CAD模型曲面縫合技術[J].農業機械學報,2010,41(8):223-226. of CAD Geometric Model for Automobile Panels[J]. Transactions of the Chinese Society for Agricultural Machinery,2010,41(8):223-226.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: