亚洲一区欧美在线,日韩欧美视频免费观看,色戒的三场床戏分别是在几段,欧美日韩国产在线人成

基于AMESim和有限元法的浮動式舉升缸支座設計與分析
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Analysis and Design of Lifting Oil Cylinder Support with Floating Support Structure Based on AMESim and FEM
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    通過拓?fù)鋬?yōu)化設計了自卸車浮動式支撐結構的舉升缸支座；利用AMESim軟件對液壓舉升系統進行仿真，得到了舉升缸支座工作時的載荷曲線和最大載荷；根據最大載荷，用有限元方法對其本身以及其對車架縱梁的影響進行了分析。與傳統底板焊接式和縱梁式結構的舉升缸支座相比，浮動式支撐結構的舉升缸支座明顯優于其他兩種結構。

    Abstract:

    A lifting oil cylinder support with floating support structure was designed by the topological optimization technology. The hydraulic pressure lifting system was simulated by AMESim software, and the load curve and the maximum load of the lifting oil cylinder support were obtained during lifting. Based on the maximum load, the load and its effects on the frame carling were analyzed by FEM. Afterward, the comparison and analysis were done among floating support structure and the other two traditional structures of jointing on bottom steel board structure and carling structure. The analytical results indicate that the lifting oil cylinder support with floating support structure is obviously superior to the other two structures. 

    參考文獻
    相似文獻
    引證文獻
引用本文

楊春暉,羅維東,張文明,王輝.基于AMESim和有限元法的浮動式舉升缸支座設計與分析[J].農業機械學報,2010,41(9):205-209.Analysis and Design of Lifting Oil Cylinder Support with Floating Support Structure Based on AMESim and FEM[J]. Transactions of the Chinese Society for Agricultural Machinery,2010,41(9):205-209.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: