亚洲一区欧美在线,日韩欧美视频免费观看,色戒的三场床戏分别是在几段,欧美日韩国产在线人成

剛度不平衡單搭接膠接接頭剪切試驗與強度分析
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家高技術研究發展計劃(863計劃)資助項目(2009AA04Z101)


Strength of Unsymmetric Single-lap Adhesively Bonded Joints
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    對被粘接件為鋼板和鋁板的剛度平衡、非平衡搭接膠接接頭進行不同溫度下的拉伸載荷剪切強度試驗,分別得到各種類型搭接件在3種溫度下的最大拉伸力值。以Goland和Reissner的一維梁模型為基礎,參考Wu Z J提出的接頭解析方法推導出求解剛度不平衡接頭端部載荷的相關公式,并且通過有限元仿真對試驗中各種類型接頭進行膠層應力分析,最后針對剛度非平衡結構對接頭強度的影響進行了討論。

    Abstract:

    In order to explore the strength of the structures with unsymmetric lap-joints, the adhesively bonded single-lap joints whose adherends were steel sheets, aluminum sheets and steel-aluminum were separately tested in tension loading which created shear across the bondline. The tests were conducted under different temperatures to provide the experimental tension loads for the three kinds of dissimilar lap-joints. According to the method which Wu Z J proposed, the equations of edge-loads were given based on G—R’s theory. The stress of adhesive was obtained through finite element analysis. In addition, the effects of the unsymmetric structure on the strength of joints were discussed.

    參考文獻
    相似文獻
    引證文獻
引用本文

李龍,胡平,劉立忠.剛度不平衡單搭接膠接接頭剪切試驗與強度分析[J].農業機械學報,2011,42(1):213-217. Li Long, Hu Ping, Liu Lizhong. Strength of Unsymmetric Single-lap Adhesively Bonded Joints[J]. Transactions of the Chinese Society for Agricultural Machinery,2011,42(1):213-217.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: