亚洲一区欧美在线,日韩欧美视频免费观看,色戒的三场床戏分别是在几段,欧美日韩国产在线人成

薄膜預應力對連棟塑料溫室結構極限承載力的影響
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

高等學校博士點專項科研基金資助項目(200802990009)、江蘇省科技支撐計劃資助項目(BE2008323)、江蘇省農機三項工程資助項目（NJ2011-46）、昆山市農業科技計劃資助項目(KN1037)和昆山市國際科技合作資助項目(KZ1011)


Influence of Film-preload on Ultimate Bearing Capacity of Multi-span Plastic Greenhouse
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    以連棟塑料溫室整體結構為研究對象，采用實物模型試驗和有限元分析相結合的方法，探討薄膜預應力對連棟塑料溫室結構極限承載力的影響。在ANSYS 10.0軟件中，采用溫度載荷模擬預應力，通過對薄膜施加不同的溫度載荷建立6種薄膜預應力下的連棟塑料溫室結構模型，并對該模型進行雪載荷工況下的雙重非線性屈曲計算。通過分析不同薄膜預應力下的載荷-位移曲線，研究了薄膜預應力對連棟塑料溫室結構極限承載力的影響。結果表明，薄膜預應力不會影響連棟塑料溫室結構的屈曲模態，但會使結構極限承載力減小17%~63%。

    Abstract:

    The integral structure of the multi-span plastic greenhouse was taken as the research subject, and influence of film-preload on ultimate bearing capacity of the multi-span plastic greenhouse was studied through physical model test and finite element analysis. By using ANSYS 10.0, firstly, temperature load was performed to numerically simulate preload, the computational models of greenhouse structure on six kinds of film-preloads condition were established by imposing temperature load. Then, dual nonlinear analysis to the computational model of greenhouse structure was given on snow load condition. Therefore, ultimate bearing capacity was confirmed by racing the balance path of the loading-displacement curve. According to analyze loading-displacement curve, influence of the film-preload on ultimate bearing capacity could be researched. It could be concluded that film-preload would not affect the integral structural buckling mode of multi-span plastic greenhouse, but would reduce ultimate bearing capacity of greenhouse structure by 17%~63%. 

    參考文獻
    相似文獻
    引證文獻
引用本文

王新忠,馬興超,毛罕平.薄膜預應力對連棟塑料溫室結構極限承載力的影響[J].農業機械學報,2011,42(10):176-180,216. Wang Xinzhong, Ma Xingchao, Mao Hanping. Influence of Film-preload on Ultimate Bearing Capacity of Multi-span Plastic Greenhouse[J]. Transactions of the Chinese Society for Agricultural Machinery,2011,42(10):176-180,216.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: