亚洲一区欧美在线,日韩欧美视频免费观看,色戒的三场床戏分别是在几段,欧美日韩国产在线人成

基于回轉車削的齒端倒角加工運動建模
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金資助項目(51005026)


Kinematic Modeling of Gear Chamfering Based on Rotary Cutting
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    分析了用回轉車削方法進行輪齒齒端倒角加工的運動情況,建立了輪齒齒端倒角加工時刀具切削刃相對工件的矢量模型。運用Matlab軟件對輪齒齒端倒角加工軌跡進行了仿真,并且在回轉車床上進行了輪齒齒端倒角的試驗驗證，運用專門的檢測工具對加工后的齒輪倒角形狀進行檢測，其倒角的角度誤差不超過0.3°，滿足工程上對倒角形狀精度的要求。

    Abstract:

    Movement of gear chamfering by rotary cutting method was analyzed. Vector model between knife and workpiece was deduced. Locus of gear chamfering was emulated with Matlab, and gear chamfering was validated on rotary cutting machine. Specialized inspection tools was used for detecting the gear chamfer shape after machining, and the chamfer angle error was less than 0.3°, which met the project accuracy requirements. 

    參考文獻
    相似文獻
    引證文獻
引用本文

胡昌軍,劉孝光.基于回轉車削的齒端倒角加工運動建模[J].農業機械學報,2011,42(12):231-234,219. Hu Changjun, Liu Xiaoguang. Kinematic Modeling of Gear Chamfering Based on Rotary Cutting[J]. Transactions of the Chinese Society for Agricultural Machinery,2011,42(12):231-234,219.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2011-12-19
  • 出版日期:
文章二維碼