亚洲一区欧美在线,日韩欧美视频免费观看,色戒的三场床戏分别是在几段,欧美日韩国产在线人成

考慮安裝誤差的擺線齒準雙曲面齒輪輪齒接觸分析
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金資助項目（50875211）


Tooth Contact Analysis of Epicycloid Hypoid Gear Considering Assembly Misalignment
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    基于雙刀頭（two-part cutter head）分體式刀盤，采用面滾式切制方法加工擺線齒準雙曲面齒輪，依據其加工展成原理建立了數學模型，并在考慮安裝誤差的情況下進行了輪齒接觸分析（TCA），得出了安裝誤差對其嚙合性能的影響。在滿足傳動性能要求的情況下，設計了輪坯參數和機床加工參數。以一對擺線齒準雙曲面齒輪為例，分析了各個安裝誤差對其嚙合性能的影響。

    Abstract:

    Based on two-part cutter head, the mathematical model of epicycloid hypoid gear pair was built through face-hobbing cutting method and generating principle. The relationship between assembly misalignment and meshing behavior was described by the results of tooth contact analysis. In the situation of transmission performance requirements, the parameters of wheel blank and processing parameters were designed. Based on a pair of epicycloid hypoid gears, the influence of each assembly misalignment on the meshing and transmission performance was analyzed.

    參考文獻
    相似文獻
    引證文獻
引用本文

王峰,方宗德,李聲晉,蘇進展.考慮安裝誤差的擺線齒準雙曲面齒輪輪齒接觸分析[J].農業機械學報,2012,43(9):213-218. Wang Feng, Fang Zongde, Li Shengjin, Su Jinzhan. Tooth Contact Analysis of Epicycloid Hypoid Gear Considering Assembly Misalignment[J]. Transactions of the Chinese Society for Agricultural Machinery,2012,43(9):213-218.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2012-09-04
  • 出版日期:
文章二維碼