亚洲一区欧美在线,日韩欧美视频免费观看,色戒的三场床戏分别是在几段,欧美日韩国产在线人成

立式加工中心靜剛度細化試驗與有限元分析
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家科技重大專項資助項目（2012ZX04010-011）


Fine Experiment and Finite Element Analysis for Static Stiffness of Vertical Machining Center
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    采用細化試驗和有限元方法對某立式加工中心靜剛度進行了研究。通過細化試驗不僅測得了機床的三向靜剛度，而且測量了主要零件的變形；對主軸箱的變形進行了細化試驗，對結果進行了詳細分析；測量了主軸箱滑塊與立柱導軌結合面的變形，結果表明該結合面y向是薄弱環節。在Workbench中建立了機床靜剛度有限元模型，通過與試驗數據的對比驗證了有限元模型的準確性。

    Abstract:

    Static stiffness of a vertical machining center was researched based on fine experiment and finite element method. Static stiffness of three directions and deformation of the main parts were measured. Deformation of the spindle box was measured and detailed analysis was taken. Deformation of the joint between spindle box and column was measured. The results showed that weak leak of the joint is y direction. Finite element model of the machining center was established in Workbench and accuracy of the model was verified compared with experiments.

    參考文獻
    相似文獻
    引證文獻
引用本文

李殿新,趙沿民,張建富,馮平法.立式加工中心靜剛度細化試驗與有限元分析[J].農業機械學報,2012,43(12):262-267,277. Li Dianxin, Zhao Yanmin, Zhang Jianfu, Feng Pingfa. Fine Experiment and Finite Element Analysis for Static Stiffness of Vertical Machining Center[J]. Transactions of the Chinese Society for Agricultural Machinery,2012,43(12):262-267,277.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2012-12-13
  • 出版日期:
文章二維碼