亚洲一区欧美在线,日韩欧美视频免费观看,色戒的三场床戏分别是在几段,欧美日韩国产在线人成

往復式雙動刀灌木收割機設計與試驗
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

“十二五”國家科技支撐計劃資助項目(2013BAD22B02)和科技部科技型中小企業技術創新基金資助項目(12C26211500972)


Design and Experiment on Reciprocating Double Knife Shrub Harvester
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    針對旋轉式切割器切割低齡小徑級檸條時存在的茬口質量差、漏割率高、纏繞等難以適應柔彈性莖桿的問題,設計了一種利用無急回特性雙曲柄搖桿機構帶動兩組刀片相向切割的往復式雙動刀灌木收割機;分析了其割刀位移、速度、加速度與曲柄轉角的關系,并對雙動刀切割速比進行了分析與試驗。結果表明:在機具前進速度m為1.0 m/s、切割速比λq為1.6時收割2年生檸條效果最佳,其茬高不合格率為2.3%,破茬率為3.3%,漏割率為2.3%,重割率為2.7%,生產率為0.38 hm2/h。

    Abstract:

    Aiming at poor stubble quality, high loss cutting rate and winding leakage for cutting young and small diameter caragana microphylla of rotary cutter, a kind of reciprocating double knife shrub harvester was designed, which using double crank and rocker mechanism with no fast returning characteristic to drive two sets of knives move and cut in opposite direction. The relation between the displacement, velocity and acceleration of the cutter with crank rotation angle was analyzed. And the double-acting blade cutting speed ratio was analyzed and tested. The results showed that it was best to harvest 2 years old caragana microphylla by the machine when the machine forward velocity was 1.0 m/s and cutting speed ratio was 1.6. The fraction defective of stubble height was 2.3%, the broken stubble rate was 3.3%, the miss cutting rate was 2.3%, the recutting rate was 2.7%, and the productivity was 0.38 hm2/h.

    參考文獻
    相似文獻
    引證文獻
引用本文

劉志剛,王德成,翟改霞,劉貴林,張寧,郝興玉.往復式雙動刀灌木收割機設計與試驗[J].農業機械學報,2013,44(Supp2):102-106. Liu Zhigang, Wang Decheng, Zhai Gaixia, Liu Guilin, Zhang Ning, Hao Xingyu. Design and Experiment on Reciprocating Double Knife Shrub Harvester[J]. Transactions of the Chinese Society for Agricultural Machinery,2013,44(Supp2):102-106.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2013-10-21
  • 出版日期:
文章二維碼