亚洲一区欧美在线,日韩欧美视频免费观看,色戒的三场床戏分别是在几段,欧美日韩国产在线人成

液態施肥機分配機構空間凸輪設計與試驗
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金資助項目（51205056）和“十二五”國家科技支撐計劃資助項目(2013BAD08B04)


Design and Test of Spatial Cam for Liquid Fertilizer Assigned Machinery
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    為滿足液態施肥機轉子式轉換器空間凸輪機構運轉平穩、防止液肥泄漏與施肥量精準的性能要求，建立了空間凸輪數學模型。應用Visual Basic 6.0開發空間凸輪優化軟件，得到凸輪的平均圓柱半徑為37mm以及輪廓曲線圖，應用Pro/E軟件對空間凸輪機構進行三維建模與運動學仿真，驗證了該空間凸輪機構設計的合理性。進行試驗臺試驗，當液壓泵壓力0.4MPa、輸出軸轉速69.75r/min時，所測施肥量基本相同，且噴肥針只在空間凸輪的推程到回程階段噴肥。結果表明：空間凸輪機構運轉平穩，符合設計要求。

    Abstract:

    In order to satisfy the performance requirements of spatial cam mechanism in rotary converter of liquid fertilizer applicator, such as stable working and precise liquid fertilization, a mathematical model of spatial cam was established. The software for optimizing the spatial cam was developed by using Visual Basic 6.0. The average radius of cylinder was got as 37mm and curve profile of spatial cam was obtained. Threedimensional model and kinematics simulation of spatial cam mechanism were established by using Pro/E software, which verified the design reasonability of spatial cam mechanism. Finally, the mechanism was tested on the testbed. The result showed that when the pump pressure is 0.4MPa and the output shaft speed is 69.75r/min, the fertilizer consumptions are almost the same at different measurement time, and the picking hole mechanism only sprays liquid fertilizer on the rise to fall travel process of converters spatial cam. The results show that the proposed spatial cam mechanism could work smoothly that meets the design requirements of spatial cam. 

    參考文獻
    相似文獻
    引證文獻
引用本文

周文琪,王金武,潘振偉,唐 漢,王 奇,多天宇.液態施肥機分配機構空間凸輪設計與試驗[J].農業機械學報,2015,46(11):64-69. Zhou Wenqi, Wang Jinwu, Pan Zhenwei, Tang Han, Wang Qi, Duo Tianyu. Design and Test of Spatial Cam for Liquid Fertilizer Assigned Machinery[J]. Transactions of the Chinese Society for Agricultural Machinery,2015,46(11):64-69.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2015-01-20
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2015-11-10
  • 出版日期: 2015-11-10